Extrusion Asia Edition 1-2026

► DREYPLAS GmbH www.dreyplas.com structure, the mechanical properties range from rigid to soft. ViviOn can be used as a separate layer in multilayer films or as a blend partner with PE or PP. The wide range of applications ex- tends from advanced film capacitors to packaging for food and medical de- vices to biodiagnostics, UVC disinfec- tion, optics, and IC manufacturing. Higher application temperatures for film capacitors : With a glass transition temperature of 147 °C, low dielectric constant, and low dielectric loss, the new ViviOn 0645 is tailored to the in- creased thermal requirements of high-performance polypropylene (PP) film capacitors. These use innovative semiconductor materials that enable more efficient and smaller electronic devices in areas such as power elec- tronics, renewable energies, and e- mobility. Since they require more energy to conduct electrons, they ope- rate at higher temperatures, voltages, and frequencies than traditional sili- con. Compared to conventional capa- citor films made of biaxially oriented polypropylene (BOPP), which have dif- ficulty meeting these requirements, ViviOn 0645 increases the heat resis- tance and dimensional stability of cor- responding capacitors to the required values. Enhanced barrier effect with me- tallized films : Thanks to their excellent barrier properties, vacuum-metallized cast films are often used in multilayer packaging. However, the compara- tively low stiffness and strength of substrates made of pure PE or PP can cause cracks to form in the ultra-thin metal layer applied to them when subjected to stress. This allows oxy- gen and moisture to penetrate the packaging, reducing the shelf life of the contents. Blends with ViviOn 8210XT offer higher stiffness without compromising flexibility, thus reduc- ing the risk of cracking. Depending on the application, this may also allow for the use of more material-efficient films with lower thicknesses. In addi- tion, this CBC can be used to optimize the tear propagation resistance of the film, which is an important conveni- ence feature for easy opening appli- cations. ViviOn 8210XT comes with a “Recyclability of Packaging Material” certificate issued by cyclos-HTP Insti- tute and is approved for use in food and pharmaceutical applications. ViviOn™ ist a trademark of USI Corporation 采用ViviOn0645的电容器薄膜比传统的聚 丙烯薄膜更耐热（左图） Capacitor films with ViviOn 0645 withstand higher temperatures than conventional PP films (left) (© Kuzmik_A/istockphoto) 处理中度污染的回收材料，投资成本为 37.5万欧元。两种配置均配备高性能的 多用途挤出机螺杆，处理量可达500公 斤/小时。 自推出以来，ReadyMac在市场上的 分量持续增强。特别是在2024年年底产 品升级以及2025年年初推出ReadyMac 500 HD之后，需求量显著增加。在 2025/2026当前财年中，新投产的机器 数量已达两位数。除了欧洲客户，来自 南非和拉丁美洲地区的客户也选择信赖 ReadyMac。 “市场反馈说明，ReadyMac是一款成 功的产品。”EREMA公司ReadyMac业 务 部 门 负 责 人 Michael Köhnhofer表 示，“我们的客户赞赏其便捷的使用性， 具 有 吸 引 力 的 价 格 和 值 得 信 赖 的 EREMA品质。在当下每一笔投资都需 ReadyMac在2022年德国杜塞尔多夫 国际塑料及橡胶博览会（K SHOW，K 展）首次亮相。三年之后，这款标准 化、现货供应的回收设备以全新面貌及 新增的消费后回收材料处理配置，重新 在2025年K展上与消费者见面并共同庆 祝其在市场上取得的成功。其销售数据 持续增长，截止2026年3月的本财年， 其装机量已与上财年装机量总和持平。 ReadyMac将高品质的回收技术与极 具吸引力的固定价格和短的时效性相结 合。客户由此获得一款标准化设备的所 有优势，该设备可广泛应用于多种薄膜 和回收料（Regrind）的处理。配备 EREMA激光过滤器的重型版特别适合 消费后回收材料，其固定价格为44万欧 元。第二款搭载了SW RTF®换网系 统，是一款灵活度高的全能机型，用于 标准化回收设备在市场中大获成功 要慎重考虑的时期，这对很多公司都极 具吸引力。” EREMA集团首席执行官 Manfred Hackl认为，ReadyMac是一个极佳的战 略补充。“通过ReadyMac，我们的目标 是吸引那些希望凭借一台能快速使用的 可靠设备，进入塑料回收领域，而非寻 求定制化方案的客户。因此，我们再次 强化了EREMA集团的产品组合。” 这 款 标 准 化 设 备 的 成 功 得 益 于 EREMA采用TVE挤出技术的成熟挤出系 统以及专利预处理调节单元（PCU）。 最终，EREMA让更广泛的客户群体能 更容易的获得可靠的回收技术。除了诱 人的固定价格和短期交付外，客户还能 享受EREMA久经考验的售后服务体系 带来的优势，包括快速的备件供应和全 球支持。 Extrusion & Recycling Asia 1/2026 行业新闻 18