Extrusion International 5-2025

33 Extrusion International 5/2025 High Quality Extrusion Tooling and Solutions Guill Tool & Engineering will exhibit at the K Show, Hall 1, Booth C90. The Guill booth will feature several tools, tips and dies, as well as new developments. These include Cam-Lock, rotary die design, Single-Point Concentricity and the NEW Guill Labs enhancements. Originally developed for the popular Guill Bullet tool, a unique Guill extrusion head that eliminates fastening hardware with a xed center design, multi-port spiral ow and gum space adjustment, Cam-Lock is now avail - able on many of the company’s existing extrusion heads. The design allows quick and easy assembly and disassem - bly of the crosshead and eliminates the need for socket head caps screws. By removing and replacing the inter- nals, a different pro le can be extruded in minutes rather than hours. Since the Cam-Lock resets the internals in the right con guration every time, there is far less chance of error, compared to the assembly and misalignment is- sues with torqued socket set screws. It only takes half a turn to remove and install the de ector tip and no fas - tening hardware is required. Additional features include fast tool changes (threaded retaining ring for the die and threaded tip retainer), dies remove from the front and tips from the back, tooling retainers for gum space ad- justment, vacuum connections, simpli ed cleaning and reduced downtime and operating costs. For a busy shop with multiple products produced or a shop processing challenging materials that require frequent cleaning, this Cam-Lock feature on Guill heads offers signi cant time, labor and cost savings. By rotating the tooling in relation to the material ow, the new rotary head design increases the wall strength of an extrusion, thereby allowing a thinner wall with less ma- terial. Bene ts include only rotating the die, randomizing any gauge bands or thickness variations and, in some cases, ELEKTROWÄRMETECHNIK FRANZ MESSER GMBH ERGE Elektrowärmetechnik - Franz Messer GmbH 91220 Schnaittach - Hersbrucker Straße 29-31 Tel. +49/9153/921-0 Fax +49/9153/921-117 www.erge-elektrowaermetechnik.de mail: verkauf@erge-elektrowaermetechnik.de HEIZEN TROCKNEN REGELN CONTROLLING HEATING DRYING Guill Rotary Die design Guill Cam-Lock design