Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

26.11.2024

Extrusion Asia 2-2024

News

News 29.01.2021

Oerlikon Barmag Huitong Engineering commissions its first PBS system

A polybutylene succinate (PBS) polycondensation system was commissioned at Yingkou Kanghui Petrochemical Co. Ltd. in Dalian, China

News 28.01.2021

SÜDPACK acquires LPF

LPF, located in Grootegast, the Netherlands, is a leading manufacturer of high barrier films for sensitive products

News 26.01.2021

For a faster bottle cycle in Italy

ALPLA to construct an extrusion system in Anagni for 15,000 tonnes of rPET a year

News 25.01.2021

RadiciGroup invests EUR 15 million in a new production line for meltblown nonwoven

The material is used for manufacturing protective face masks and other personal protective equipment (PPE)

News 22.01.2021

Whole NGA group is now active on the US market

Under NGA Inc., three companies, so-called DBAs (Doing Business As) are registered – COLLIN Lab & Pilot Solutions, BritAS Filtration Systems and COMELT Collin Melt Solutions

News 22.01.2021

SABIC and Plastic Energy to start construction advanced recycling unit

The world’s first commercial unit will significantly upscale production of certified circular polymers derived from used plastic

News 21.01.2021

B+K: Sustainable product protection

The B+K U-Pack® side gusseted bag is now available with over 40 percent PCR

News 21.01.2021

The date for interpack 2023 is set

The next interpack will take place from 04 to 10 May 2023 at the Düsseldorf Trade Fair Centre

Articles

Preheater Range for Wire and Cable Manufacturing from Zumbach

The range is built around an innovative intelligent induction power controller, ensuring stable and linear heating of conductors.

Articles

How To Replace PFAS in Medical Technology

A team at the Fraunhofer Institute IFAM has succeeded in developing solutions that hold great promise of targeted substitution for PFAS in fields including medical engineering

Case studies

Сase studies

Sikora's X-RAY 6000 PRO for quality control by Huacheng Cable

The system allows inline measurement of wall thickness, eccentricity and diameter of up to three material layers

Сase studies

Sikora inspection and measuring systems ensure the HV and EHV cables

HV and EHV cables place the highest demands on their function and their production

Videos

Bausano Twin Screw Extruder MD 75-30 in the extrusion line

The line is equipped also with a cooling and calibration pipe tank, Digital Extruder control 4.0, degassing unit and pressure transducer

Videos

Mflow extrusion plastometer from ZwickRoell

ASTM D1238 Melt flow plastometer is designed for MVR measurements according to method A