Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

26.11.2024

Extrusion Asia 2-2024

News

News 03.05.2018

ST Blow Moulding: Open House in Monza simultaneously with PLAST 2018

In addition to its stand at the Plast exhibition, ST has also organised an Open House in their historic home at the Monza factory

News 02.05.2018

Cabot Corporation expands specialty compounds business

Cabot Corporation has completed two expansion projects that will extend its global footprint in black masterbatch and compounds

News 01.05.2018

New ThermoPRO granulators from Rapid Granulator

At NPE2018, Rapid Granulator is introducing a new range of granulators designed specifically for in-line processing of skeletal waste from sheet and film thermoforming lines

News 01.05.2018

RKW puts extrusion machine in Michelstadt into operation

Using the new extrusion machine in Michelstadt, RKW is now able to produce films with a width of between eight and 18 meters (26-59ft)

News 30.04.2018

TOMRA introduces new SHARP EYE technology for separating PET trays from PET bottles

This enhances the previous capability of TOMRA's AUTOSORT machine to separate multi-layer trays

News 30.04.2018

UTH presents a new polymer dosing system at the Achema

The continuous polymer dosing system offers a solution specially for the feeding, plasticizing and dosing of polymers of higher viscosity

News 26.04.2018

PTi opens Technology Development Center at Aurora

New Technical Center provides customers demonstration trials on production-scale sheet extrusion systems

News 26.04.2018

Bandera confirms once again its high reputation in agrifilm

In April, a renowned Indian producer has had the chance to test an innovative 7-layer Agri FutureFilm® line

Articles

Preheater Range for Wire and Cable Manufacturing from Zumbach

The range is built around an innovative intelligent induction power controller, ensuring stable and linear heating of conductors.

Articles

How To Replace PFAS in Medical Technology

A team at the Fraunhofer Institute IFAM has succeeded in developing solutions that hold great promise of targeted substitution for PFAS in fields including medical engineering

Case studies

Сase studies

Sikora's X-RAY 6000 PRO for quality control by Huacheng Cable

The system allows inline measurement of wall thickness, eccentricity and diameter of up to three material layers

Сase studies

Sikora inspection and measuring systems ensure the HV and EHV cables

HV and EHV cables place the highest demands on their function and their production

Videos

Bausano Twin Screw Extruder MD 75-30 in the extrusion line

The line is equipped also with a cooling and calibration pipe tank, Digital Extruder control 4.0, degassing unit and pressure transducer

Videos

Mflow extrusion plastometer from ZwickRoell

ASTM D1238 Melt flow plastometer is designed for MVR measurements according to method A