Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

26.11.2024

Extrusion Asia 2-2024

News

News 22.03.2018

Amut: Innovative cast line for the production of CPP film

This line, 2100 mm width, has been specifically designed for the production of film with smooth surface for general purposes and film with embossed surface

News 20.03.2018

New GN800 high-speed form/cut/stack thermoformer at NPE2018

GN Thermoforming Equipment will run a meat tray in PET/PE laminate with a 12-cavity mold while maintaining a reduced scrap rate of 18%

News 15.03.2018

New sugarcane PE film for circular economy

Providing all the same performance characteristics as common PE along with much lower carbon emission

News 15.03.2018

HF Mixing Group: Strong demand for mixing room systems

At Tire Technology Expo, the solution for integrated automation of mixing room systems and intelligent process technology were at the centre of interest

News 15.03.2018

Nordfolien joins the RPC Group

NORDFOLIEN becomes the fifth business unit of the RPC bpi group, complementing RPC bpi group's decentral market focussed approach

News 15.03.2018

ConservaCube package wins four FPA achievement awards

Flexible packaging company recognized for innovative heavy duty packaging that uses NOVA Chemicals resins

News 13.03.2018

Sukano and Omya to develop new voiding agent for BOPET films

The two world leaders combine their efforts to create high performing calcium carbonate voiding agent masterbatches for BOPET and BOPLA films

News 12.03.2018

Covestro starts commercial production of composites

The continuous fibre-reinforced thermoplastic composite material can be produced efficiently and is attracting interest of many customers and industries

Articles

Preheater Range for Wire and Cable Manufacturing from Zumbach

The range is built around an innovative intelligent induction power controller, ensuring stable and linear heating of conductors.

Articles

How To Replace PFAS in Medical Technology

A team at the Fraunhofer Institute IFAM has succeeded in developing solutions that hold great promise of targeted substitution for PFAS in fields including medical engineering

Case studies

Сase studies

Sikora's X-RAY 6000 PRO for quality control by Huacheng Cable

The system allows inline measurement of wall thickness, eccentricity and diameter of up to three material layers

Сase studies

Sikora inspection and measuring systems ensure the HV and EHV cables

HV and EHV cables place the highest demands on their function and their production

Videos

Bausano Twin Screw Extruder MD 75-30 in the extrusion line

The line is equipped also with a cooling and calibration pipe tank, Digital Extruder control 4.0, degassing unit and pressure transducer

Videos

Mflow extrusion plastometer from ZwickRoell

ASTM D1238 Melt flow plastometer is designed for MVR measurements according to method A